Defender portal
In brief
The guide now reflects the current Defender portal path for Microsoft Sentinel connectors and updates retention steps to use the table details Overview and Retention tabs. Screenshots and portal labels were also refreshed.
What Defender admins need to know
Administrators can use the revised navigation and retention instructions when configuring connectors.
Summaries are generated from the documentation change itself.
Documentation change
The comparison below shows only the changed extract. Use the full-page view for complete context.
After you or someone in your organization installs the solution that includes the data connector you need, configure the data connector to start ingesting data.
- For Microsoft Sentinel in the Defender portal, select
Microsoft Sentinel>ConfigurationsSetup & configuration > Data management > Data & connectors., select the Connectors tab, and select Classic connectors - Microsoft Sentinel from the connector selector. For Microsoft Sentinel in the Azure portal, under Configuration, select Data connectors. - Search for and select the connector. If you don't see the data connector you want, check again that the relevant solution is installed in the Content hub.
- Select Open connector page.
Defender portal

Azure portal
If you have onboarded to the Microsoft Sentinel data lake, you can configure data retention and tiering for the data connector. The data lake consists of an analytics tier - your current Microsoft Sentinel workspaces, and a data lake tier where you can store data for up to 12 years. For more information on onboarding, see Onboarding to Microsoft Sentinel data lake.
When you enable a connector, by default the data is sent to the analytics tier and mirrored in the data lake tier. Configure data retention in each tier or send the data only to the data lake tier. Retention and tiering are managed from the connector setup pages, or using the TableTables tab under Setup & configuration > Data management page> Data & connectors in the Defender portal. For more information on table management and retention, see Manage data tiers and retention in Microsoft Defender Portal.
Once you have set up your connector, configure data retention and tiering using the following steps:
On the Connector details page, in the Table management section, select the table you want to manage.
The table details panel
is displayedopens on the Overview tab, showing the current retention settings.To configure retention, select the
Manage tableRetention.tab.
TheOn theManage tableRetentionpanel is displayed, showing the current retention settings. Youtab, you can change the retention settings for the analytics tier and the data lake tier. The default is to mirror the data to the data lake tier with the same retention as the analytics tier.Under Analytics retention select the retention period for the analytics tier.
To configure the data lake tier, select a retention period from the Total retention drop-down list.

To change the tier to data lake only, select the Data lake tier and select a retention period from the Retention drop-down list. Selecting this option stops further ingestion to the analytics tier.
Select Save to save the changes.
After you configure the data connector, it might take some time for the data to be ingested into Microsoft Sentinel. It takes 90 to 120 minutes for data to be ingested into the data lake. When the data connector is connected, you see a summary of the data in the Data received graph, and the connectivity status of the data types.

Enable User and Entity Behavior Analytics (UEBA) from supported connectors
To enable UEBA from supported data connectors in Microsoft Defender portal:
From the Microsoft Defender portal navigation menu, select Setup & configuration > Data management > Data & connectors, select the Connectors tab, and select Classic connectors - Microsoft Sentinel
> Configuration > Data connectors.from the connector selector.Select a UEBA supported data connector that supports UEBA. For more information about UEBA supported data connectors and tables, see Microsoft Sentinel UEBA reference.
From the data connector pane, select Open connector page.
On the Connector details page, select Advanced options.
Under Configure UEBA, toggle on the tables you want to enable for UEBA.
Find your data
Both Microsoft and other organizations author Microsoft Sentinel data connectors. Find the support contact on the connector's details page in Microsoft Sentinel.
In theFor Microsoft Sentinel in the Defender portal, select Setup & configuration > Data management > Data & connectors, select the Connectors tab, and select Classic connectors - Microsoft Sentinel from the connector selector. For Microsoft Sentinel in the Azure portal, under Configuration, select Data connectorspage, select.Select the relevant connector.
To access support and maintenance for the connector, use the support contact link in the Supported by field on the side panel for the connector.
For more information, see Data connector support. \ No newline at end of file
@@ -45,8 +45,10 @@ item_type: Content source_path: sentinel/configure-data-connector.md cmProducts: - https://authoring-docs-microsoft.poolparty.biz/devrel/8a94907f-2511-4271-b5ca-ec7f2e75067c+- https://microsoft-devrel.poolparty.biz/DevRelOfferingOntology/c671beaa-a830-4c9f-aceb-97379ee031ca spProducts: - https://authoring-docs-microsoft.poolparty.biz/devrel/bffa8e88-f633-409d-a24d-083bdbc68872+- https://microsoft-devrel.poolparty.biz/DevRelOfferingOntology/8921374c-4dbe-4ed0-b011-a39e18bfbd98 platformId: 4579db48-04de-976b-3104-121f185be0d9 --- @@ -75,12 +77,12 @@ Before you begin, make sure you have the appropriate access and you or someone i
After you or someone in your organization installs the solution that includes the data connector you need, configure the data connector to start ingesting data.
-1. For Microsoft Sentinel in the [Defender portal](https://security.microsoft.com/), select **Microsoft Sentinel** > **Configurations** > **Data connectors**. For Microsoft Sentinel in the [Azure portal](https://portal.azure.com), under **Configuration**, select **Data connectors**.
+1. For Microsoft Sentinel in the [Defender portal](https://security.microsoft.com/), select **Setup & configuration** > **Data management** > **Data & connectors**, select the **Connectors** tab, and select **Classic connectors - Microsoft Sentinel** from the connector selector. For Microsoft Sentinel in the [Azure portal](https://portal.azure.com), under **Configuration**, select **Data connectors**.
2. Search for and select the connector. If you don't see the data connector you want, check again that the relevant solution is installed in the **Content hub**.
3. Select **Open connector page**.
# [Defender portal](#tab/defender-portal)
-
+
# [Azure portal](#tab/azure-portal)
## 
@@ -98,26 +100,26 @@ After you or someone in your organization installs the solution that includes th
If you have onboarded to the Microsoft Sentinel data lake, you can configure data retention and tiering for the data connector. The data lake consists of an analytics tier - your current Microsoft Sentinel workspaces, and a data lake tier where you can store data for up to 12 years. For more information on onboarding, see [Onboarding to Microsoft Sentinel data lake](datalake/sentinel-lake-onboarding).
-When you enable a connector, by default the data is sent to the analytics tier and mirrored in the data lake tier. Configure data retention in each tier or send the data only to the data lake tier. Retention and tiering are managed from the connector setup pages, or using the **Table management** page in the Defender portal. For more information on table management and retention, see [Manage data tiers and retention in Microsoft Defender Portal](manage-data-overview).
+When you enable a connector, by default the data is sent to the analytics tier and mirrored in the data lake tier. Configure data retention in each tier or send the data only to the data lake tier. Retention and tiering are managed from the connector setup pages, or using the **Tables** tab under **Setup & configuration** > **Data management** > **Data & connectors** in the Defender portal. For more information on table management and retention, see [Manage data tiers and retention in Microsoft Defender Portal](manage-data-overview).
Once you have set up your connector, configure data retention and tiering using the following steps:
1. On the **Connector details** page, in the **Table management** section, select the table you want to manage.
- [](media/configure-data-connector/connector-details.png#lightbox)
-2. The table panel is displayed showing the current retention settings.
-3. To configure retention, select **Manage table**. [](media/configure-data-connector/manage-table.png#lightbox)
-4. The **Manage table** panel is displayed, showing the current retention settings. You can change the retention settings for the analytics tier and the data lake tier. The default is to mirror the data to the data lake tier with the same retention as the analytics tier.
+ [](media/configure-data-connector/connector-details.png#lightbox)
+2. The table details panel opens on the **Overview** tab, showing the current retention settings.
+3. To configure retention, select the **Retention** tab. [](media/configure-data-connector/manage-table.png#lightbox)
+4. On the **Retention** tab, you can change the retention settings for the analytics tier and the data lake tier. The default is to mirror the data to the data lake tier with the same retention as the analytics tier.
5. Under **Analytics retention** select the retention period for the analytics tier.
-6. To configure the data lake tier, select a retention period from the **Total retention** drop-down list. [](media/configure-data-connector/analytics-and-data-lake-tier.png#lightbox)
+6. To configure the data lake tier, select a retention period from the **Total retention** drop-down list. [](media/configure-data-connector/analytics-and-data-lake-tier.png#lightbox)
7. To change the tier to data lake only, select the **Data lake tier** and select a retention period from the **Retention** drop-down list. Selecting this option stops further ingestion to the analytics tier.
8. Select **Save** to save the changes.
-[](media/configure-data-connector/data-lake-tier-only.png#lightbox)
+[](media/configure-data-connector/data-lake-tier-only.png#lightbox)
After you configure the data connector, it might take some time for the data to be ingested into Microsoft Sentinel. It takes 90 to 120 minutes for data to be ingested into the data lake. When the data connector is connected, you see a summary of the data in the **Data received** graph, and the connectivity status of the data types.
-
+
## Enable User and Entity Behavior Analytics (UEBA) from supported connectors
@@ -125,13 +127,13 @@ After you configure the data connector, it might take some time for the data to
To enable UEBA from supported data connectors in Microsoft Defender portal:
-1. From the Microsoft Defender portal navigation menu, select **Microsoft Sentinel > Configuration > Data connectors**.
+1. From the Microsoft Defender portal navigation menu, select **Setup & configuration** > **Data management** > **Data & connectors**, select the **Connectors** tab, and select **Classic connectors - Microsoft Sentinel** from the connector selector.
2. Select a UEBA supported data connector that supports UEBA. For more information about UEBA supported data connectors and tables, see [Microsoft Sentinel UEBA reference](ueba-reference#ueba-data-sources).
3. From the data connector pane, select **Open connector page**.
4. On the **Connector details** page, select **Advanced options**.
5. Under **Configure UEBA**, toggle on the tables you want to enable for UEBA.
- [](media/enable-entity-behavior-analytics/entity-behavior-analytics-data-connector.png#lightbox)
+ [](media/enable-entity-behavior-analytics/entity-behavior-analytics-data-connector.png#lightbox)
## Find your data
@@ -145,9 +147,10 @@ Navigate to **Data lake explorer** > **KQL queries** to query data in the dat
Both Microsoft and other organizations author Microsoft Sentinel data connectors. Find the support contact on the connector's details page in Microsoft Sentinel.
-1. In the Microsoft Sentinel **Data connectors** page, select the relevant connector.
-2. To access support and maintenance for the connector, use the support contact link in the **Supported by** field on the side panel for the connector.
+1. For Microsoft Sentinel in the Defender portal, select **Setup & configuration** > **Data management** > **Data & connectors**, select the **Connectors** tab, and select **Classic connectors - Microsoft Sentinel** from the connector selector. For Microsoft Sentinel in the Azure portal, under **Configuration**, select **Data connectors**.
+2. Select the relevant connector.
+3. To access support and maintenance for the connector, use the support contact link in the **Supported by** field on the side panel for the connector.
- [](media/configure-data-connector/support.png#lightbox)
+ [](media/configure-data-connector/support.png#lightbox)
For more information, see [Data connector support](connect-data-sources#data-connector-support).\ No newline at end of file 




